25 December 2016

We Wish You a Merry Creepmas - Part 3: The War on Creepmas


"Season's Greetings to all and to all a-"

"What did you just say...?"

"I said... seasons... greetings to a- wait! What are you doing? Put that sword down what are youAAAAAARGHHHkttktthhhhhh......"

"Let that be a lesson to ALL of you! I am the Creepmas Elf, and 'The War on Creepmas' just got real!"

22 December 2016

We Wish You A Merry Creepmas - Part 2


In which batch two of the Wipsters manage to get their Christmas themed figures on the computer and displayed for all to see!

Whiskey Priest: A Christmas No-el



'Oh Hello. Err..Do you want to come in for a mince pie and some milk?'

'No'

'Oh, Brandy perhaps? Some mulled wine?'

'No'

'Ok. Is there something else you'd like?'

'No'

'Em. Can I help you with anything then?'

'No'

'So are you just going to stand at my door looking grumpy? I mean, it's not even dark yet and I do have a chimney that you could use. Is it the chimney? Have I not cleaned it properly? The little boy I sent up there said it was all clear right before he... '

'No'

'What is it then? You can't just stand there freaking me out. Are you going to say anything else but no?'

'No'

'Aw come on! This is so weird! Why are you doing this? Look, you must be Santa, you've got the pre-cola look going on, you've park your sleigh in my flower bed....aww come one that with red nose just shat in my water bucket!'

'No'

'He did, i just watched him. He fucking did!'

'No'

'Right. Thats it! Fuck you! Get off my property, i want you and your mob of stupid big antelopes of my lawn'

'No'

'Aaaaarrgggh!' Slam!


Cheetor: Bark the Herald Angels Sing


My local-ish Warhammer Store is running a competition, to build and paint a winter themed Warhammer miniature.

Naughty
After deciding to take part, choosing a model was surprisingly easy.  I painted an old Citadel Space Santa in 2014, so I figured that adding a Space-Xmas tree to accompany him on his interstellar breaking and entering spree would be apt.

My submission would be a motile, bio-weapon armed, skull covered, homicidal Xmas treeperson from space, to hang around with Santa from space.  Why not?
Not Nice.
Because kitbashing space Xmas tree people miniatures is pain in the arse.

Luckily also in 2014 I made a few space dryads (long before the Sylvaneth came along and stole my shtick, sciencedammit) so I had a fair idea how to proceed.


This microproject was quite enjoyably seasonal. I have to say.

There is something very Judge Dredd about an armed sci-fi Santa and his armed Xmas treebeast, so 28mm Mega City One is where I am most likely to get some gaming use out of "Holly" I reckon.

Thats also why she has a third arm/branch holding a big ol' alien gun behind her back.

Festive PEW-PEWs to all.


21 December 2016

We Wish You a Merry Creepmas! - Part 1

With the traditional festivities for the end of the year going on, some WIPsters have decided to celebrate them the best (if not only) way they know: painted models. Below are the first set of festive miniatures, with a second post due if more of our intrepid Wipsters can dodge wrapping things and drinking stuff in order to paint their entries before Christmas is upon us.

Santa is coming.

Now take a seat, a nice drink and enjoy the quiet joy of painted models before the frenzy of calories, children screaming all around, sitting next to your in-laws and such wonderful times.


Asslessman: Nativity in the Hive.


After having both my space Santa and and Sanity Klaws painted last year, I was short on Christmas themed miniatures I must say.
Things is, I'm absolutely not fond of the red and green associated with that time of the year and the thought of giving a red nose and candy stick to some other "normal" model was beyond me...
But then what ? Oh there's this other Christmas story yes, the one about the birth of a kid whose 33 years on earth have changed the world afterward.
Now here's something I feel more comfortable with, I had just the perfect couple of models for it and I had the idea to make this  fun.
So here's my Christmas entry, a sinister nativity scene with the birth of a child that might very well change the face of his world...


Axiom: Candlemas in The Slump

Every year, just around the winter equinox, inhabitants of The Slump gather round the dung fires to share a meal of roast hag-lice and a glass of radshine. Legend has it that the infamous bounty hunter, The Blessed Sniklaus, visits The Slump, delivering gifts to the needy and worthy and summary justice to the good. The Blessed Sniklaus is a barrel-chested man with a booming voice and an expansive dark beard. He rides a sledded grav-sled, laden with packages and pulled by a tireless beast. The gifts are handed out by his grumpy squat happy little helper, accompanied by the festive jingling of his slung ammo belts. So as you hear the jolly "Ho, ho, ho!" and the whine of the grav-sled, you must ask yourself, have you been naughty or nice?




99% of all Space Santas are red with white trim. Fact. Cheetors's is. Asslessman's isn't, but he's a maverick (I am also a maverick. Your maverick measurement criteria are suspect - Cheetor) My Space Santa is less seasonal. More Brian Blessed than Richard Attenborough. Bombastic, unhinged, charismatic, dangerous to know!


Mr Saturday: Santa, Chaos Style

"So, how many skulls did you reap for Khorne this year sonny? Let's see if I have a mutation or daemon-flavoured lollipop in here for you..."

This is my first time painting something festive, and I had just the fellow. I spent some time tracking this guy down, and this was the perfect opportunity to get him under the brush. I give you Chaos Santa. What does he have in his sack for you?


For a rather venerable old sculpt, this lad is pretty big. That's a 32mm base he's striding over. He has a fair few nooks and crannies to get paint into, but he's a lovely chunky fellow and he's going to make sure you have a merry Christmas. The Gods demand it. Especially Khorne. Mad for Christmas that lad. Look at his colours, red, black, gold? All he needs is a big sack of skulls to give out and a fake beard. "HO HO HO MORTALS, KHORNE DEMANDS JOY! RIVERS OF BL- I MEAN JOY. PILES OF SK- AH, MERRIMENT, RISING UP TO THE SKY! CHAOS BLESS US, EVERY ONE!"


I had never used snow effects before, I used some slush and snow from Hudson & Allen I've had for years. It turned out pretty okay I think, I even found a bauble to throw in there.

It might be Santa, but he still has a nice meaty axe tucked into his belt. That ain't for cutting down the Christmas tree I'll warrant.

Stay tuned for Creepmas Part 2!

18 December 2016

The Heroquest Hero Quest: The Second Goblin

When I got invited to participate in The Heroquest Hero Quest, I was courteously informed that the pickings were fairly slim in what was left to paint. I recalled the HQ goblins being decent miniatures, and had a vague recollection of one residing in one of my shoeboxes of old WHFB miniatures. Some digging followed, and I was on board with this little fellow:

"Decent" status debatable
As you can see from the photo, I had done a wonderfully clean job back in the 90s of removing him from both his integral base and his right foot. I had then cleverly circumvented the problem by simply ignoring it and gluing his stump of a leg to the base - a 20mm square to befit a goblin in WHFB.

The basing provided me with a bit of a problem, and I wondered whether I should try to rebuild the foot out of putty and if I should give the poor goblin a more prestigious base. The 20mm slotted square, after all, combined several poor elements: it had a huge slot in the middle, it was small and cramped and due to its size I hadn't even been able to glue the poor gobbo facing directly forward.

I decided against changing the base, however. I felt a weird sense of obligation to an 17 or so years distant version of me, who had decided that this was the way to go with this particular goblin. Who was I to argue with teenage me, full of enthusiasm for a newly started hobby, after all. So the 20mm square stayed on. This left just the problem of the foot. I decided to follow the same principle, and not rebuild the foot.

I left the stump as it was, but designed the base to suggest that the goblin was wading in mud and the foot was just submerged. I had long wanted to try out Citadel's Stirland Mud texture paint, so this was a good chance for that as well.

Instead of painting the goblin as a greenskin, I went for a mustard yellow/brown skintone. I had tried this earlier on some goblins and liked the result a lot. This combined with my aversion to painting green skin (after years of painting orcs and goblins for WHFB) sealed the deal. This would be a pale and pasty creepy little murderous underground dweller - or in a word, a goblin.

I kept the paintjob simple, with a basic brown robe, grey boots and a worn, rusted axe blade. I painted the axe haft red as a nod to that 90s orc and goblin aesthetic, but kept the red dark and toned down to fit the mini.

I puttied over the slot in the base, slapped a lot of Stirland mud around, slapped a lot of brown wash around and slapped a lot of gloss varnish around. Add in a few tufts, and voilá! Goblin standing in deep, icky mud it is. So rather than working on a teenage mistake, I had just literally ended up burying and glossing it over as an adult. Art imitates life and all that...

Anyway, here's the finished product, hope you like it! It makes me happy to finally see this mini painted. After all those years and that chopped off foot, he deserved it.





12 December 2016

The Heroquest Hero Quest: The Gargoyle


The big lad of Heroquest ladies and gentlemen. The guy you call in when you've just had enough of adventurers messing up your gaff and killing your minions. I mean, who wants to interview another batch of orcs for entry level dungeon lurking after the barbarian has butchered your entire staff? This lad is the very fellow for re-establishing dungeon harmony. I give you the gargoyle.

A certain amount of confusion surrounds this plastic fiend. Is it a statue? Is it the smallest bloodthirster ever created? Was Khorne having a laugh after too many craft ales on a Friday night? "Ha ha, make him smaller, but angrier!" Tzeentch giggled, spilling his gin while looking over Khorne's shoulder as he brought the smallest greater daemon ever into existence.

08 December 2016

HEROCULTS


Out of nowhere, while the WIPSters were casually talking about yoga breastfeeding, the nutritional content of vampire urine and the merits of different epoxy putties, the subject of the sad Heroquest 25th boardgame arose. That's when Crooks found that picture and everything changed forever...

(beware, non-sense ahead...)

05 December 2016

The HeroQuest Hero Quest: The second Orc

Sitting on a rotten bench

Eyeing little grots with bad intent

Snot running down his nose

Greasy fingers smearing shabby clothes

Wattalung!

It was such an honor to be invited to join the HeroQuest Hero Quest on such an august group as Scale Creep. Okay, maybe "invited" is a bit of a mischaracterization. Maybe it's a little more accurate to say that I begged and whined until they couldn't take it any more and let me participate. If there is one thing I've learned from my children, it's that if you whine long and loud enough, you will get what you want!

Those that heard me on the Veteran Wargamer Podcast will know that I grew up with HeroQuest. I'd dabbled in Science Fiction and Fantasy prior to that, but it was the introduction to HeroQuest that set my course forever. This was the first fantasy game that I would sit around the table with my parents and/or friends and play. I've even been working on my own HeroQuest project to paint all the models from the main set and Return of the Witch Lord.

So when it came time to choose what model to paint, I was left with a bit of a conundrum. I've already painted all the undead and goblins. I didn't want to be rude and request a hero, those should be left for the bloggers that are actually part of scale creep. And the same applies to the Chaos Sorcerer and the Gargoyle. So that left the fimir, the chaos warriors, and the orcs. Several of the fimir had already been claimed and I felt uncomfortable claiming a chaos warrior; so an orc it was!

I've been removing all my HeroQuest models from their integral bases and attaching them to some very nice Dragon Forge bases. So the first step was to choose several orcs from my pile (I always batch paint) and attack them with the razor saw. 

Here he is removed from his plastic stand

28 November 2016

The HeroQuest Hero Quest: The first Orc

Hi everyone! Suber here reporting for duty! I'm coming on board of this sweet, crazy HeroQuest Hero Quest project. So let me take my hat off to all of you and get down to work.

When I was approached for this, I thought 'fuck, I've already painted all my HeroQuest minis!'. No sweat. I'm ready to strip and repaint whatever you throw at my face. Ha!
Yes, I know. The most obvious answer would have been buying more stuff. Under general circumstances I would have done so. But I was so excited I couldn't wait!

I'm in charge of an Orc. The reliable backbone of any self respected Evil Army. The quintessence of dungeoneering. The... well, you get the idea. I chose this mini as starting point:

Huh? What's wrong with me?

17 November 2016

The HeroQuest Hero Quest: The Chaos Sorcerer



Best thing about Heroquest is the CHAOS SORCERER. 

First of all, he's a cracking figure to begin with, the details are sublime and just sharp enough to be visible without being too obvious to let the painter some freedom of judgement about what is what.

Best thing about the sorcerer is clearly his evocative Y shaped pose making anyone think about whether he's doing aerobics, preparing a genkidama, giving a hand for airport traffic or simply showing his dad how big a fish he's caught.

Best thing about this guy is that he has big muscles for a sorcerer, that's just how badass he is really. Instead of spending all his time in the library reading, whining about how heavy the books are, this one is doing one-armed pushups and squats while reading unholy tomes.

14 November 2016

The HeroQuest Quest : The First Goblin

'Allo Creepers -  Littleleadperson here!

In the latest instalment of the HeroQuest Hero Quest we have the most fearsome creature of all! Behold and despair for he will tear down your towns and eat your daughters - it is the horrific, the earth-shaking.....

Goblin

Let's be honest this little grunt would be lucky if he got to scrape the Barbarian before having his green arse flattened like a pancake.

To paint this little punk I followed some techniques I unearthed from the White Dwarf number 97. 





I've been poring over the 'Eavy Metal and Blanchitsu articles from those early days and the work of Richard Wright struck me with his very clean but subtle work. 



Following his methods as described by John Blanche in this edition of Blanchitsu I undercoated him white and mixed Goblin Green with Citadel Yellow Ink to give him his skin colour.

Then with a very thin brush tip I built up the colour and highlights by mixing in white layer by layer. I added blue ink to the mix to shade down in the crevices. Adding some black Nuln Oil to the mix i then shaded between the goblin flesh and other surfaces.

For his belt, boots and tunic I did much of the same with paint mixed with inks to create the light and shade. For the sword I also followed Wright's M.O. and this time covered it in a diluted layer of blue ink and adding more and more grey to the mix I applied a progressively lighter drybrushes.

I really enjoyed this technique - it brings out the detail early on and so the character of the figure is easily and quickly apparent.

Now on to the entry of everyone's favourite Frenchman JB !

06 November 2016

The HeroQuest Hero Quest: The Third Fimir

Unlike the lovely chaps who are running and participating in this HeroQuest painting challenge, I have never actually played HeroQuest. Or any of the quest-y type games. I'll just let that sink in for a moment while you pick yourselves up from the floor...

Nor have I ever painted any of the plastic figures that came with the quest-y games, having previously viewed them with an abhorrence that is usually reserved for the dubious brown mush you find under your shoes after a stroll through a park popular with dog walkers.

But I was wrong. Well, at least in this case. I chose to paint one of the Fimir because I had picked up a bunch of them in bare plastic a little while ago because I saw them for sale on the cheap. The first figure I pulled out of the group had appalling mould slippage on the plastic, and I nearly decided to call it a day at that point. But on the off-chance I thought I'd check out another figure in the group, and it was fine. I had no idea that mould slippage variation like this was a feature of the plastic figures. Live and learn....

So, after small amount of mould line cleaning and a bit of green stuff filling of a hole in the small of the Fimir's back (some sort of plastic injection side effect?) it was time to think of a colour scheme. Well, actually, I'd already had one in mind. I was going to go full 1980s on this one:


I went with Foundry's Bright Green triad mixed with a little of their yellow for the main body colour, with a bit of a yellow glaze at the end. I was pleasantly surprised how much I liked this sculpt, and it was a complete joy to paint.

I decided to keep the base very simple because I didn't want it to detract from the rather fetching layout I've put him on. I don't think it's a piece of HeroQuest board, but I found it in my stash of scenery boards and I rather liked it.

Thanks for stopping by!

Next in line : Ashley

26 October 2016

The HeroQuest Hero Quest: The Second Skeleton

Don't you love it when stuff coincides? Back in the summer I painted a load (over 200, not that I'm bragging or anything...) of miniatures, mostly for the big Morcar-themed battle at BOYL. That meant loads of HeroQuest minis. So last month, when a certain Asslessman asked me to contribute a figure for the HeroQuest Hero Quest I had already painted all my orcs, goblins and fimir... that meant I was turning to the forces of undeath... but wait! Aren't I just about to start a skeleton army? Why yes I am. Sounds like a good opportunity to decide how I'm going to paint all these bones.

I do owe quite a lot to the HeroQuest skellibob with his big scythe (and big bones!). HQ got me into Citadel Miniatures in the first place and I was always more keen on the forces of undeath than on the greenskins. My first army (at least 50% of which was HQ miniatures from the main box and Witch Lord expansion) was undead (4th ed, although we used the 3rd ed book, 4th ed "get started guide" and I actually had the 4th ed undead armies book- a Christmas present from my parents). Sadly that army was given away along with most of my miniatures collection when I went through a brief spell of adulthood. With the Fimir done (for now) I have decided it is time to set myself a new army and want to recreate my first undead horde- recreate it as I would have liked it to have been back then that is!

22 October 2016

The HeroQuest Hero Quest: The Second Chaos Warrior

Time for a guest spot from someone half-human, half-warhead, all idiot.  It's Curis.

Let's do a dungeon-bash quickie between big projects!  To recap, the three Scale Creep commandments of the project are:
  • Paint a charmingly basic model from HeroQuest
  • nO cRaZy CoNvErSiOnS
  • Replacing the sausagey rectangle base is encouraged.
I picked a Chaos Warrior. To the 7-year-old boy learning words from game components, but not pronunciations: a "Chouse" Warrior.

"Hoots mon!  There's a chouse louse about this house!"

Theottovonbismark has already shown off Slambo and the 4E plastic Chouse … ahem … Chaos Warrior.  Here's the HeroQuest dude alongside Battlemasters and Legend of Zagor Chaos dudes, for no reason other than to showcase the breadth of my vintage Chaos.

Prejudiced against gorefs, means he's a gorefist.

Otto's updating of this old plastic has freehand and a jazzy base.  My version is painted so tamely in comparison. I've gone for the red-and-metal scheme which you might think is a homage to the original HeroQuest art, but is really so he ties into my 1980s Chaos Warband. Being a 1989er *I think* he is actually the newest miniature.   Everything is relative.

"Oi HeroQuest! Bet you're so young you don't remember POGs!"

After modern-style crisp highlighting you start to realise the limitations of the miniature – a combination of 1989 plastic technology and 27 years of man-handling ("manchild-handling"?).  So to hide the dalrymples I painted some textures: sponge-chipping the armour; fluting on the horns; notching the axe blade; and blood-spatter over the finished piece.  I've recently become aware that competition painters like different textures on a miniature to provide interest and contrast, and to showcase their skills.

He's left many a nasty axe wound.

The texture I'm fondest of at the moment is the blood-spats.  After a lot of trial and error with a Blood Bowl team recently I've hit upon the following method: load up a tiny brush with your blood-effect paint of choice, put it right in front of your lips, and blow.  You instantly get realistic spines, satellite spatters, cast-off patterns and other terms I'm just regurgitating from a CSI episode.

Guess this means he's the Herald of the ApocaLIPS.
(•_•) ( •_•)>⌐■-■ (⌐■_■)
That's all for now!  Next in the chain we have a man who goes where no ordinary rabbit would dare – Geoff Solomon-Sims.

18 October 2016

The HeroQuest Hero Quest: The Second Fimir

Today, the Creeps are happy to let our friend Phreedh present his own addition :

When the handsome fellows on the Scale Creep blog invited me to join their HeroQuest Hero Quest, I could hardly turn them down. After all, I had already embarked on this journey myself and could use an incitement to revisit the project. A week later, I can offer up a rough looking bog cyclops for your viewing pleasure!



I chose to submit a fimir, because it was… already a work in progress. For me, the hobby is all about cutting corners and reaching results with the least level of effort. 

I’m a firm believer in “80/20″. Applied to the modelling hobby, one can say a model reaches 80% of the potential result when you’ve spent 20% of the total effort on it. 

For me, that’s a pretty good spot to stop in. Could I do another level of highlights? A few more glazes? Maybe a free hand pattern? Sure. Would it matter, in the long run? Nope. 

Instead I can spend the same time finishing another few models to an acceptable level… or browse interwebz forums. At least, it’s better than my old paint jobs from the early 90s.


There’s not much to say about the finished fimir. Gretchin Green base coat, washed with Devlan Mud and highlighted with Gretchin Green mixed with Vallejo Pale Flesh and Bronzed Flesh, and another wash of Gryphonne Sepia. The basing used is the same as on all my fantasy models. A 25 mm metal washer, with painted sand and static grass. Simple things!

It’s a bit more traditional in colour scheme than what the godfathers of Fimir (Mr Saturday and Fimm) have used, but I’m pretty happy with how it turned out. I spent some unnecessary effort on the eye. A yellow eye ball with a black pupil would’ve sufficed. Instead I did a white eye ball, black dot, yellow iris and then a black pupil. Doesn’t even show in the photo. Nuts!

Coming up next, Curis – master of elbow painting and sphincter trumpeting! Knock it out the box, Curis!

05 October 2016

The HeroQuest Hero Quest: The Elf

Cheetor said: "No-one will want to do the elf, it's a pile of plastic crap*."

I said: "I'll do it, I quite like it actually..."

*paraphrased

So I volunteered to paint up the Elf, happily one of the few HQ figures I happened to have lying around in a box. Something about Elves has always pressed my buttons anyway - I don't like buffoonish Orcs or gruff, humourless Dwarves. I do like long-haired folk wearing tight trousers dancing around with rapier-sharp blades though...

Anyway, here is the classic red plastic of the HQ Elf post stripping of the previous paint job. Note the added dagger in his right hand. This was an addition by a previous owner and I decided to keep it, because it may very well have been a contemporary addition (so kind of doesn't break the "no messing" rule too much). Plus it looks cool.

The Elf. Unmodified (nearly).
 

29 September 2016

Dragon Metal Tag VI - Necromundan Vent Dragon

Sorry, very sorry. I know I was tagged for Dragon Metal back in May by Whiskey Priest after his gorgeous (and cute) Dragon Rider. I had an idea that I was going to shift the focus a bit and do a dragon themed jetbike using the Warzone Mishima Dragon Bike. So I bought one second hand, stripped off the old paint job, broke some bits, and then saw Agis Neugebauer's gorgeous version. I decided to give up there and then!

Gorgeous Warzone Dragon bike painted by Agis Neugebauer.

So I hesitated. I pondered. I thought about doing a classic fantasy dragon - why not? But I wanted to do something a little less predictable. Eventually, I rummaged around, and pulled together these parts; namely 1) tail of a lictor, 2) Colony 87 Cameleoid, 3) Wings of a Colony 87 Gargouille.


25 September 2016

Haemo-Erotic Tag 7: Grigor "Veinrip" Flangegrinder


Grigor Flangegrinder see's a world of blood. Preferring to bludgeon his victims into submission with his bronze skull flail he opens up his victims arteries and revels in the spray of arterial blood.

See - World of blood, told ya.

20 September 2016

The HeroQuest Hero Quest: The Fimir

Milton Bradley: "So guys, everyone knows about orcs, goblins and mummies and stuff, but what about these
 'fimirs' we're putting in the game? Tell me all about them!"


Games Workshop: "Uhhhhhhhhhhh...." 


Woooooooooooooooo! Look at me playing with the big boys! Hello to everyone, this is Rochie from Buried Under Lead, and thanks to the lads for taking the fence down and letting me in for a bit!

16 September 2016

The HeroQuest Hero Quest: The Barbarian


The best thing about HeroQuest is the Barbarian's hair boots



Buffdar the Huge, Warrior of the North, Bearer of the Biggest Guns, Five Time Champion of the Frozen Lake Loincloth Vigil, swung his broadsword into the bony face of a skeleton, smashing it to powder, before hacking a zombie in twain with the backswing. He hummed a crude little undead-slaying tune as he turned and smashed his sword pommel into the face of an advancing mummy, causing it to stagger backwards. As it did so, the hulking barbarian stomped down on a trailing rag and watched with amusement as the ancient creature comically unravelled, spinning helplessly across the rough dungeon tiles before tumbling into a yawning stake-pit, it's dessicated husk becoming impaled on multiple rusty iron spikes. The mummy continued to groan and twitch, each motion causing it to slide a little further down the shaft, where it would remain until it finally crumbled to dust.


14 September 2016

The HeroQuest Hero Quest: The Skeleton

Brave readers, airbornegrove26 here...or for this Quest you may call me Mentor... If you have made it this far you must have conquered Barak Tor, recovered the Spirit Blade and slain the cruel Witch Lord.   But alas what we feared most has occurred.  The Witch Lord has returned and with him the minions of undeath creep across the land. 


I was really excited when Scale Creep invited me to take part in their Heroquest challenge.
My love for Heroquest is well known among the Oldhammer community.



I can still remember opening that sweet box on Christmas.  Ripping the shrink wrap away and accidentally trimming off the gargoyles horns in my haste.  I swear it looked like sprues to my young eyes!!!! That was it.  I was hooked on fantasy miniatures from then on.  BROOOOOADSWORD!


I played for hours with this game, and still do on occasion.  I know, I need to make a new Heroquest comic report.  Don't worry I have been thinking on doing that.  Maybe after the Oldhammer weekend. When things slow down a bit.


So the challenge:
  • Paint one of the models from Heroquest.  
  • Dont muck around with it too much, a reinterpretation isnt what is desired, just a new paint job on an old model.  
  • Rebasing is allowed. 

After pondering which hero or monster to choose.  I decided on the skeleton.
Boooooooooring!  But wait!


Notice the scythe head?  In the monster cards that came with the game the scythe is the opposite way.  I'm sure this was either an artists mistake/interpretation or with the printing some how mirroring it backwards.  Anyway I decided to give it a try, because how else are you going to spice up a boring old bag of bones.

             
  I painted him using foundry colors.  Trying to match him as close as possible to the monster card photo.  I've left him on his Heroquest base, as I will actually game with him.  With his scythe different from the others he might work into a character of some sort.

Next up I'm tagging in our man

                  

11 September 2016

The HeroQuest Hero Quest: The Chaos Warrior

Following on from our last installment of The HeroQuest Hero Quest


HeroQuest Chaos Warior


When the idea to paint the HQ models was discussed I was keen to paint one up but I immediately knew that a "Hero" or murderhobo as I tend to view them is not exactly something that is in my general oeuvre.   Once the murderhobos were claimed by the various Creeps I was quick to stake my claim for the Chaos Warrior.


Chaos Warrior Stats from HeroQuest - Of course I did, the UK one is $%&+.




The chaos warrior, an iconic symbol of GW.  This is one of the most excellent images or our HeroQuest style chaos warrior (art from Advanced HeroQuest, by Adrian Smith), it expresses their raw power and menace beautifully. 



Slambo lives up to his name by hitting henchmen hard enough to embed them in dungeon walls.



Designing the Chaos Warior


With the technology of the time there were serious design constraints to contend with
The Chaos Warrior model was developed from a Chaos Warrior prototype.  I assume this was made by Jes Goodwin, but I don't know for sure.

HeroQuest Chaos Warrior prototype featured in White Dwarf painted by Mike McVey


The prototype is very reminiscent of the classic Slambo Chaos Warrior mini, this one is the best example of which I have found painted.


Slambo painted by JiNNai
  
The final design is more stylized and graphical, created with organic curves that improve the overall aesthetic balance.  The design has also become a bit statue like with some weird overlong overhangs as a result of positioning the elements in a tolerance to the manufacturing process.


There is also this variant of the production HeroQuest plastics who could be the brother of our warrior..but he is a project for another day :).

Separated at birth?
 


Painting the Chaos Warior


Overall I feel that our chaos warrior is a pretty decent realisation of the prototype design.  So let's prove it with some painting!


When painting this antique I duly adhered to the constraints: 
  • Paint one of the models from Heroquest  
  • Dont muck around with it too much, a reinterpretation isnt what is desired, just a new paint job on an old model  
  • Rebasing is allowed 

HeroQuest Chaos Warrior

I opted to liberate this fellow from his base, I am not a fan of those myself but they can be made to look groovy in the right hands.  I wanted to give the model a bit more dynamism by changing the centre line on the model to the right by having him standing on a sloped base.  He is a wide stanced lad so I stuck him on a 30mm diameter base.


Mushrooms made from GS


I figure on using this old boy as my avatar in future games of Silver Tower, I wanted him to be as vaingloriously attention mongering as the best murderhobo.  I gave him a soapbox level of height for that purpose.  

I sculpted in some mushrooms as I imagine him posing on rocks in dungeons/caves/orphanages looking to pwn noobz for lewt and XP's.

Single handedly bringing the chainmail mini skirt back into fashion.


One unusual feature of the sculpt is that the helmet is actually directly connected to the shoulder pads in a feature reminiscent of an M.C. Escher artwork.  The result of this is that our chap would not be able to turn his head.  To help him out I have painted an eyeball on to the middle part of his helmet which also contributes to the general chaosicity and adds some vital comedy value for group games. 

I chose a classic colour scheme with a simple animal print.  The animal print is alluding to a history crusading (AKA organised murderhoboing).

So to finish up, I am tagging in our buddy AirborneGrove from http://givemlead.blogspot.ie/ in as he has kindly agreed to paint up one of the HeroQuest models in his wonderfully unique style.  We look forward to seeing what he comes up with.